Contact
  1. Home
  2. Services
  3. Fire testing
  4. Buildings and materials
  5. Solar panels (PV systems)

The increasing use of building-mounted solar panels is creating new fire safety challenges for roofs and existing fire testing methods. Roof-mounted PV systems can influence how fire develops and spreads in roof systems.

Existing fire test methods for roof systems do not always provide a representative picture of fire behaviour when PV systems are mounted on roof constructions. In particular, the cavity between the roof construction and the PV installation can influence fire spread.

DBI has both the facilities and experience to carry our fire test of solar panels and PV-systems.

Technician observing a large fire during testing of roof-mounted solar panels.

Fire tests of roof mounted solar panels

In our research project SOL-IGNIS – Fire testing of roof-mounted solar panels, we investigate how existing fire test methods for roof systems can be further developed (see video from one of our full- scale fire testst).


The long-term objective is to contribute knowledge that can support future test methods and standardisation related to fire safety of PV systems in buildings.

Visit project page

One of DBI furnaces after a fire test, where a technican is pouring water on the burning test item.

See some of our fire test furnaces in this video

Our 3,000 square meter headquarters near Copenhagen houses a modern fire laboratory with various furnaces for almost all types of fire tests.

This makes it possible for us to conduct almost all types of fire tests, from small-scale to full-scale, with items as high as 4.48 meters.

Watch the video of some of our fire testing facilities.

Let us talk about your fire testing project

Christina works closely with our fire testing engineers, and she will be happy to assist you with your enquiry and connect you with the right team.

Christina Hald
Christina Hald
International Sales Manager Nordic & Baltic
Details
Christina Hald

Christina is looking forward to hearing from you

Fill out the form below and get in touch with Christina.

The information you send trough this contact form will only be used to contact you as a response to your request. We process personal data in accordance with our Privacy policy.

Thank you for your inquiry


You will be contacted as soon as possible.

Related news

The biggest climate impact from a timber-building fire may come after the fire

New research suggests that the environmental consequences of fires in timber buildings extend far beyond smoke and flames. The findings highlight why fire safety and sustainability can no longer be treated as separate disciplines.

Facility managers lack knowledge about fire protection systems

If you are responsible for operating fire protection systems, it is important that you understand your responsibilities and have documentation proving that you are in control of them. In practice, however, some operational managers lack the necessary training and do not know what to do if the alarm goes off.
Firefighters tackling an intense car fire with large flames in dark surroundings.

10 new trends in construction that challenge emergency services

The green transition is not only affecting our energy sources and choice of building materials, but is also changing the conditions under which emergency services operate. This creates a need for greater knowledge about new materials and technologies that can prepare rescue services for future operations.

The signs are clear. So why do people still miss the exits?

Emergency signage is designed to be understood instantly in a crisis. But research shows that even well-designed signs are often overlooked – which is pointing at a new generation of dynamic and intelligent evacuation systems.

New possibilities for safe battery testing

As the number of batteries in our society increases, so does the need for knowledge about fire risks and safety. Therefore, DBI has developed new test facilities that make it possible to conduct fire tests of batteries under safe and controlled conditions.

Modern cars with more plastic put pressure on fire safety in car parks

Modern cars burn far more intensely than they used to. This challenges fire safety in existing parking facilities, as regulations have not kept pace with developments. A new report may help car park owners map their risks.

Why your fire safety instructions don’t work

If you want people to comply with fire safety rules in a building, you need to understand their behavior and make it easier for them to do the right thing. User involvement and a focus on building design are therefore the path to a safer building.

DBI’s Fire Detection Test Lab has been accredited

With the accreditation of DBI’s new laboratory for testing fire detection systems, it is now possible to meet the high demand in this area.

Divided classification clarifies how smoke control doors actually perform

A fire door is not a smoke control door, and a smoke control door is not a fire door. A lack of knowledge about the difference remains a challenge for fire safety in construction, but divided classification shows how smoke control doors are tested.

Fire tests expose vulnerabilities in hybrid steel-timber floor connections

A new study shows how unprotected steel in hybrid steel-timber (HST) floor cross-sections can act as a heat transfer pathway during a fire, increasing charring of the timber in HST connections. However, appropriately designed intumescent coating of the exposed steel surface can prevent this damage under standard fire exposure.

How to encourage fire-safe behavior in buildings

How to encourage fire-safe behavior in buildings Building owners must instruct occupants so that they comply with the building’s fire safety regulations. But how do you get people to change their behavior and do the right thing?

Infrared data reveals hidden fire behaviour in insulation materials

A new white paper from DBI demonstrates how infrared machine vision and data processing uncover hidden variations in insulation materials during fire-exposure testing – and points to a method that could transform testing of other construction products.

The risk of fire doubles in December

In December, emergency services extinguish twice as many living-room fires as in the other months of the year. A well-watered Christmas tree keeps its festive glow and significantly reduces the risk of fire, according to a new fire test conducted by DBI and Danish Emergency Management Organisation.

DBI can now test 4 fire dampers simultaneously

Most test laboratories can test two or three fire dampers at a time. But with new testing equipment, DBI can now conduct fire tests on four dampers simultaneously. This makes the process both faster and cheaper for manufacturers.

New Guide: How to get ready for fire testing your products

Which classification does your product need? How can you develop your product quickly and cost-effectively? What specifications does the fire laboratory need before your fire test? See DBI’s new free guide, and get useful tips on how to complete your fire test and project in the most efficient way.

Triple-glazed windows withstand fire – new study challenges old assumptions

Until now, little has been known about how modern multi-pane low-energy windows behave in fully developed fires. Fire models have often assumed complete glass fallout. However, new furnace tests conducted at DBI by researchers from DTU and DBI now show clear differences: Double-glazed windows exhibited significant fallout, while triple-glazed panes largely remained in place.

New Guidance on fire safety in taller wooden buildings

Timber is transforming construction, but its fire behaviour challenges the very foundations of current safety methods. A new guidance chapter from a European collaboration highlights why performance-based design is so valuable, why self-extinguishment must be the ultimate goal, and why layered fire safety is the only robust strategy in the face of uncertainties.

DBI opens new Fire Detection Test Lab

Europe lacks facilities for testing fire detection systems. DBI is now changing that with a new state-of-the-art laboratory and a new accredited testing area.

Building operations must be considered during the design phase

It can become costly if fire safety is forgotten during the design phase. But the operation of a building should also be taken into account in the early stages of a construction project. Otherwise, there is a risk of ending up with solutions that are both fire hazardous and lead to illegal use of the building.

Computer simulations can increase the chances of passing facade fire tests

Postdoc Guoxiang Zhao is working to improve computer simulations of fire in a facade. A new scientific article brings simulations one step closer to the ultimate goal: reducing the number of failed fire tests and shorten products’ time-to-market.

DBI researcher gains international recognition for work on memory and evacuation

PhD student Leo Willem Menzemer has been awarded The Dr. Guylène Proulx, OC Scholarship for his research on how long people are able to remember a specific evacuation route in a building. The scholarship includes $5,000 and an invitation to present his findings at a conference in Canada.

DBI expands with fire testing of cables

DBI and FORCE Technology have acquired the company 3P Third Party Testing ApS and will henceforth continue the company’s activities within their respective core areas.

New covering standard eliminates misleading fire tests

A new and revised European standard for fire testing of building covering will take effect on 31 January, 2026. However, DBI encourages manufacturers to test according to the revised standard already now. The new standard will provide a more uniform safety level across countries, as well as new, flexible opportunities for manufacturers.

Timber construction feels more fire-prone than concrete, brick, and steel buildings

A new study shows that timber construction is popular – both because of its aesthetics and its green profile. However, many people perceive timber buildings as being less fire-safe than those made from concrete, brick, or steel. But what are these perceptions based on? And could public perception become a barrier to increased timber construction?

Soon the first timber facades will be built at height without fire-retardant treatment

With the BioFacades:UpHigh project, DBI (The Danish Institute of Fire and Security Technology) has gained valuable knowledge about material use, and the first developers are already applying the project’s findings to real construction projects. This marks an important step toward widespread use of bio-based facades in taller buildings.

One step closer to a full-scale test of thatched facades

Two additional scaled-down facade tests of thatched constructions have been conducted as part of the latest MUDP project, which aims to develop modular multi-story buildings using biogenic materials. A full-scale facade test is planned for later this year.

New DBI fire test with a 200 kg lead ball

Three powerful impacts after the classification test are part of DBI’s new fire test, the Impact Test. This test is used for walls in industrial and warehouse buildings, where there may be an increased requirement for wall robustness in the event of a fire.

Old fire doors pass fire test easily

DBI and door manufacturer Jeld-Wen are analyzing and documenting the fire resistance of reused fire doors through the ReDoor project. They are also developing documentation methods and possibilities for certification. Initial fire tests show that both old doors and artificially worn doors perform convincingly.

Lessons from Switzerland reveal intriguing opportunities in timber construction

DBI's recent study trip to Switzerland unveiled innovative solutions and more lenient regulations for timber construction compared to Denmark's building code.

Fire testing of straw constructions to enable more Biogenic Building

As part of a so-called MUDP project, DBI has conducted three scaled-down facade tests of different straw constructions types. Consequently, adjustments will now be made to one or more of these constructions before further testing is carried out. The goal is to make it feasible to use biogenic materials in multi-story modular construction.

Test of Biogenic Fire Protection paves the way for Sustainable Construction

DBI has tested and demonstrated that a biogenic cladding wall’s fire resistance can meet the EI 30 fire classification. The scalability of the project now makes it possible to fire-protect a wide range of biogenic insulation materials with the tested construction.

On the Job with a DBI Inspector: Compromised Fire Safety in a High-Rise

Does the smoke alarm work? Is the fire department automatically alerted? Does the overpressure ventilation still function if the doors to the stairwell are open? These are some of the questions that DBI's inspection department seek to answer.

Final Report: Everyone Failed when Grenfell Tower Burned

Seven years after the deadly fire at London’s high-rise Grenfell Tower, the final report concludes that lawmakers, housing management, architect and engineers, contractors, material manufacturers, testing institutes, certification bodies, and emergency services all failed miserably. This failure claimed the lives of 72 people.

Fire Investigator on the Job: Why Did the Summer House Burn Down?

Did the gas grill, the outdoor fireplace, the patio heater or something else cause the summer house to burn down? Join fire investigator Henrik Sværke, who makes a living solving such mysteries, on his daily routine.

DBI develops specialized fire testing equipment for a Swedish manufacturer

DBI has combined a range of strong expertise to design custom-made fire testing equipment, enabling AkzoNobel to fire-test their own products during the development process. This allows them to get faster and cheaper indications of their products' fire-related properties.

Want to build in wood? Consider covering at least 80 % of mass timber surfaces

New study finds that a fire in a mass timber compartment is less likely to auto-extinguish when the exposed surface is more than 20 % of the total surface area.

Impregnation and field of application are crucial for the fire properties of wooden panels

It is significant whether wood is fire-impregnated before or after it is cut into panels. Additionally, the material onto which the panels are mounted is of crucial importance for the fire properties of the panels. This was demonstrated by four comparative SBI fire tests conducted by DBI in collaboration with Burnblock.

Denmark lacks fire safety guidelines for renovation and conversion works

In Denmark, almost all fire safety rules lapse when buildings are under construction, renovation or conversion. Following the disastrous fire at Børsen (the old Stock Exchange building in Copenhagen), DBI recommends that guidelines are worked out for fire safety during the construction and conversion phases.

Fire tests reveal the potential of wooden facades in high-rise buildings

Halfway through the Biofacades:UpHigh project, the short conclusion is: Wooden facades burn well – but it is certainly possible to build bio-based facades.

DBI Certification can certify products for ventilation ducts

Construction material manufacturers can now have their components for ventilation ducts (EN 12101- 7) certified in Denmark. DBI’s subsidiary, DBI Certification, has obtained accreditation for the certification of both natural smoke and heat extraction fans and flue gas ducts with the aim of obtaining CE marking for the European market.

Building structures with more biogenic materials

We need more climate and environmentally friendly solutions in construction. Therefore, DBI is involved in a new project to develop and fire-test prefabricated structures in biogenic materials scaled for multi-storey construction.

Suppression system for electric vehicle fires in multi-storey car parks shows promising results

DBI – the Danish Institute of Fire and Security Technology has tested a solution based on early detection and a water mist system for multi-storey and underground car parks. The fire test shows that the solution can prevent the spread of an electric vehicle fire to vehicles parked alongside for at least 30 minutes.

Scaled fire testing leads to successful full-scale bio-facade testing

The third construction in DBI’s BioFacades:UpHigh easily passed a full-scale facade test. This was preceded by a number of downscaled fire tests and adjustments along the way, which proved to be very successful.

DBI can test according to the hydrocarbon fire curve

11 megawatts. This is the power output of DBI’s large multi-furnace. In addition, it can fire test specimens measuring 5 x 3 metres. This offers some unique opportunities and is difficult to find anywhere other than at DBI – The Danish Institute of Fire and Security Technology.

DBI streamlines standard for fire testing of wooden panels

The test standard for walls with wooden panels has previously been inadequate, which has made it impossible to classify the panels. Years of work by DBI (The Danish Institute of Fire and Security Technology) has now made the test standard more accurate and enabled classification.

Biofacade lasted for 11 ½ minutes

The first full-scale facade test in the BioFacades:UpHigh project has just been conducted at DBI. After 11 ½ minutes, the fire reached above the second flame deflector, and the construction failed the test. A further nine tests will follow in the project, which will shorten the path for sustainable facades in multi-storey buildings and result in actual facades being built in Denmark.

Small-scale fire tests with broad perspectives for the construction industry’s climate footprint

DBI has successfully conducted 39 indicative small-scale fire tests on 14 different bio-based structures. This forms part of the ‘Fireproof Bio-Based Structures’ project.

Breakthrough for recycled construction timber

The burn rate of recycled wood – regardless of its age – remains within the Eurocode 5 limit values and thus does not differ from new CE-marked wood in terms of fire safety. The Spireprojekt Upcycling Orangeri 2.0, which was recently completed, has proved this. The next step is to find non-destructive methods for evaluating the wood.

Wild solar panel record puts fire risk in the spotlight

On 21 April, more than half of Danes’ electricity came from solar panels. But the more solar panels we install, the more fires we will see, says DBI's expert in solar panel fires, Jens Steemann Kristensen.

New fire extinguishing equipment for electric cars on ferries tested by DBI

A Danish company has tested the usability of its EV Firefighter in collaboration with DBI. The documentation is of great value to the Danish company in a new world market, which has a strong focus on finding ways to extinguish fires in electric cars.

5 tips for better fire safety in multi-storey buildings

How do you ensure fire safety in the attic of multi-storey buildings? Should a fire safety engineer always be used, or can the housing association carry out its own checks to increase safety? A new campaign provides answers and some simple tips for better fire safety.

Conclusion from the ELBAS project: Possible to safeguard ferries against electric car fires

Fires in electric or hybrid vehicles cars on ferries pose a new, special risk. But it can be handled with the right additions to the existing emergency preparedness on board. This is the conclusion of the ELBAS project, which has been led by DBI.

Project aims to transform construction waste into new building materials

In collaboration with the manufacturers Troldtekt and Komproment, and the waste collector RGS Nordic, DBI is aiming to develop pilot plants over the next three years that will use construction waste to produce geopolymer binders. This can replace cement in new building materials.

Wood:UpHigh: Watch Fire Resistance Test of Wall Construction with Bio-based Materials

As part of the Wood:UpHigh project, DBI has recently carried out a fire resistance test of a wall construction with primarily bio-based materials. The wall passed 71 minutes (REI60) before the insulation collapsed.

DBI project on covered facades wins awards in both Denmark and abroad

“It’s ambitious, it’s brave, it’s bold.” And: “Through experimentation and cross-disciplinary collaboration, insight, learning and useful results are achieved that can lead to radically new sustainable directions for construction”.

Solar cells increase the risk of fire spreading on flat roofs

Solar panels mounted on flat roofs can spread fire in the gap between the roof and the panel. Jens Steemann Kristensen, who is a Research Consultant at DBI – the Danish Institute of Fire and Security Technology, has written a PhD thesis on the issue.

New knowledge about battery fires in electric cars on ferries

DBI – The Danish Institute of Fire and Security Technology has recently conducted extensive testing into the detection and extinguishing of battery fires in electric cars on vehicle decks in ferries. It took place in a structure consisting of 40-foot containers. Read some of the preliminary experiences and recommendations.

Re-insulation may cause a risk of fire

Re-insulation in the attic is popular with many home-owners looking to cut their heating bills. But if the building also has a fireplace and chimney, there are strong indications that this can cause a risk of fire. This is demonstrated by the experiences of both fire investigators and chimney sweeps, as well as tests conducted by DBI.

Grenfell Tower fire update

Flammable facade cladding, incorrect fire ventilation, no sprinkler system, dubious evacuation strategy and fire doors which only held for 11 minutes. There were problems all round when Grenfell Tower caught fire in summer 2017 and 297 people were trapped inside. The latest information about the fire has been revealed at a recent conference hosted by DBI – The Danish Institute of Fire and Security Technology.

New possibilities for flammability testing of polymeric materials

The plastic used in, for example, wheelchairs and dialysis equipment, in electronics and in trains, must adhere to certain standards of flammability and thus also to the methods used to test it. With its new test facility, DBI can now test smaller components in accordance with, for example, the UL94 standard.

Report prepares the ground for new Building Code in the wake of Grenfell Tower

The first report following the Grenfell Tower fire in London has been published. It comes with recommendations for a new building code and fire safety system in England.

Solid timber elements can self-extinguish in the event of a fire

There is considerable evidence that timber will become an even more important construction material. In recent years, several researchers have been investigating the strength and fire safety properties of cross-laminated timber, and it is hoped that newer versions of solid timber elements will, by and large, be fire-resistant.

Both progress and challenges have appeared during the drafting of a European facade test

It is not perfect, but it is a big improvement. A draft proposal has been put forward for a common European standard for testing building facade systems, and even though it has some flaws, there are grounds for optimism.
Cone calorimeter

Manufacturers save money with DBI's new tool

This autumn, a new calorimeter arrives at DBI's fire lab. It will be used for small scale trials of materials before testing in full scale. And it can mean substantial savings for manufacturers.

London fire emphasises challenges with high-rise buildings

Classic technical challenges fighting fires in high-rise buildings probably played a part in the catastrophic Grenfell Tower fire in London, in which at least 80 people lost their lives.

Location

Our headquarters and test facilities are centrally located in Copenhagen, Denmark – close to the motorway and only a 15-minute drive from Copenhagen Airport.


Address: Jernholmen 12, 2650 Hvidovre, Denmark

Terms of use of the DBI website
Copyright © All material on DBI's website is protected by copyright law. If you are in any doubt about how to use our material, feel free to contact us at dbi@dbigroup.dk.
GTS
CFPA